Monitor Process - HP MSR1003-8S Command Reference Manual

Default
The interval for identifying a kernel thread deadloop is 8 seconds.
Views
System view
Predefined user roles
network-admin
Parameters
time interval: Specifies the interval for identifying a kernel thread deadloop, in the range of 1 to 65535
seconds.
slot slot-number: Specifies an MPU by its slot number. If you do not specify this option, the active MPU is
specified. (Distributed devices in standalone mode.)
slot slot-number: Specifies an IRF member device by its ID. If you do not specify this option, the master
device is specified. (Centralized devices in IRF mode.)
chassis chassis-number slot slot-number: Specifies an MPU on an IRF member device. If you do not
specify this option, the global active MPU is specified. (Distributed devices in IRF mode.)
cpu cpu-number: Specifies a CPU by its number. (Distributed devices in standalone or IRF
mode/centralized devices in IRF mode.)
Usage guidelines
If a kernel thread runs for the specified interval, kernel thread deadloop detection considers that a
deadloop has occurred. The system records the deadloop and restarts.
Inappropriate use of the command can cause service problems or system breakdown. Make sure you
understand the impact of the command on your network before you use it.
Examples
# Set the interval for identifying a kernel thread deadloop to 8 seconds.
<Sysname> system-view
[Sysname] monitor kernel deadloop time 8
Related commands
display kernel deadloop configuration
•
display kernel deadloop
•
• monitor kernel deadloop enable
monitor kernel deadloop exclude-thread
•

monitor process

Use monitor process to display process statistics.
Syntax
Centralized devices in standalone mode:
monitor process [ dumbtty ] [ iteration number ]
Distributed devices in standalone mode/centralized devices in IRF mode:
monitor process [ dumbtty ] [ iteration number ] [ slot slot-number [ cpu cpu-number ] ]
339