Info-Center Logfile Overwrite-Protection; Info-Center Enable - HP MSR1003-8S Command Reference Manual

info-center logfile overwrite-protection

Use info-center logfile overwrite-protection to enable log file overwrite-protection. When the last log file
is full or the storage device runs out of space, the device stops saving new logs to the log files.
Use undo info-center logfile overwrite-protection to disable log file overwrite-protection. When the last
log file is full or the storage device runs out of space, the device deletes the oldest log file and creates a
new one to save new logs.
Syntax
info-center logfile overwrite-protection [ all-port-powerdown ]
undo info-center logfile overwrite-protection
Default
Log file overwrite-protection is disabled.
Views
System view
Predefined user roles
network-admin
Parameters
all-port-powerdown: Shuts down all the service ports on the device when the last log file is full or the
storage device runs out of space.
Usage guidelines
This command is supported only in FIPS mode.
By default, log file overwrite-protection is disabled. When the last log file is full or the storage device runs
out of space, the device deletes the oldest log file and creates a new one to save new logs.
You can enable log file overwrite-protection to stop the device from saving new logs when the last log file
is full or the storage device runs out of space.
Examples
# Enable log file overwrite-protection.
<Sysname> system-view
[Sysname] info-center logfile overwrite-protection

info-center enable

Use info-center enable to enable the information center.
Use undo info-center enable to disable the information center.
Syntax
info-center enable
undo info-center enable
Default
The information center is enabled.
427