Ipv6 Netstream { Inbound | Outbound } Sampler - HP MSR1003-8S Command Reference Manual

Views
Interface view
Predefined user roles
network-admin
Parameters
inbound: Filters incoming traffic.
outbound: Filters outgoing traffic.
acl acl-number: Specifies an ACL by its number.
For a basic or an advanced ACL, the value range is 2000 to 3999.
•
• For an Ethernet frame header ACL, the value range is 4000 to 4999.
Usage guidelines
IPv6 NetStream filtering uses an ACL to identify intended packets.
If you want to collect data for specific flows, use the ACL permit statements to identify the flows. IPv6
•
NetStream collects data only for these flows.
If you do not want to collect data for specific flows, use the ACL deny statements to identify the flows.
•
IPv6 NetStream does not collect data for these flows.
Examples
# Use ACL 2003 for outbound IPv6 NetStream filtering on GigabitEthernet 2/0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 2/0/1
[Sysname-GigabitEthernet2/0/1] ipv6 netstream outbound
[Sysname-GigabitEthernet2/0/1] ipv6 netstream outbound filter acl 2003

ipv6 netstream { inbound | outbound } sampler

Use ipv6 netstream sampler to enable IPv6 NetStream sampling.
Use undo ipv6 netstream sampler to restore the default.
Syntax
ipv6 netstream { inbound | outbound } sampler sampler-name
undo ipv6 netstream { inbound | outbound } sampler
Default
IPv6 NetStream sampling is disabled.
Views
Interface view
Predefined user roles
network-admin
Parameters
inbound: Enables IPv6 NetStream sampling in the inbound direction.
outbound: Enables IPv6 NetStream sampling in the outbound direction.
398