Sflow Collector - HP MSR1003-8S Command Reference Manual

Parameters
ip ip-address: Specifies an IPv4 address for the sFlow agent.
ipv6 ipv6-address: Specifies an IPv6 address for the sFlow agent.
Usage guidelines
HP recommends that you manually configure an IP address for the sFlow agent.
Only one IP address can be specified for the sFlow agent on the device. A newly configured IP address
overwrites the existing one.
Examples
# Specify IP address 10.10.10.1 for the sFlow agent.
<Sysname> system-view
[Sysname] sflow agent ip 10.10.10.1

sflow collector

Use sflow collector to configure parameters for an sFlow collector.
Use undo sflow collector to remove an sFlow collector.
Syntax
sflow collector collector-id [ vpn-instance vpn-instance-name ] { ip ip-address | ipv6 ipv6-address } [ port
port-number ] [ datagram-size size ] [ time-out seconds ] [ description text ]
undo sflow collector collector-id
Default
No sFlow collector information is configured.
Views
System view
Predefined user roles
network-admin
Parameters
collector-id: Specifies an sFlow collector by its ID in the range of 1 to 10.
vpn-instance vpn-instance-name: Specifies a VPN instance by its name for the sFlow collector. A VPN
instance name is a case-sensitive string of 1 to 31 characters and cannot contain spaces. By default, the
sFlow collector belongs to the public network.
ip ip-address: Specifies an IPv4 address for the sFlow collector.
ipv6 ipv6-address: Specifies an IPv6 address for the sFlow collector.
description text: Configures a description for the sFlow collector. The default description is "CLI
Collector."
datagram-size size: Specifies the maximum length of the sFlow data portion in an sFlow packet. The
value range for the size argument is 200 to 3000 bytes and the default is 1400 bytes.
port port-number: Specifies the UDP port number of the sFlow collector, in the range of 1 to 65535. The
default is 6343.
410