Display Process - HP MSR1003-8S Command Reference Manual

Function Address = 0x80179b30
Function Address = 0x80127438
Function Address = 0x8012d734
Function Address = 0x80100a00
Function Address = 0xe0071004
Function Address = 0x8016ce0c
Function Address = 0x801223a0
Instruction dump:
41a2fe9c 812300ec 800200ec 7f890000 409efe8c 80010014 540b07b9 40a2fe80
4bfffe6c 80780290 7f64db78 4804ea35 <807f002c> 38800000 38a00080 3863000c
For detailed information about the command output, see
Related commands
reset kernel exception

display process

Use display process to display process state information.
Syntax
Centralized devices in standalone mode:
display process [ all | job job-id | name process-name ]
Distributed devices in standalone mode/centralized devices in IRF mode:
display process [ all | job job-id | name process-name ] [ slot slot-number [ cpu cpu-number ] ]
Distributed devices in IRF mode:
display process [ all | job job-id | name process-name ] [ chassis chassis-number slot slot-number [ cpu
cpu-number ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
all: Specifies all processes. With the all keyword or without any parameters, the command displays state
information for all processes.
job job-id: Specifies a process by its job ID, in the range of 1 to 2147483647. Each process has a fixed
job ID.
name process-name: Specifies a process by its name, a case-insensitive string of 1 to 15 characters that
must not contain question marks or spaces.
slot slot-number: Specifies a card by its slot number. If you do not specify this option, the command
displays process state information for the active MPU. (Distributed devices in standalone mode.)
Table 65.
323