Sflow Agent - HP MSR1003-8S Command Reference Manual

Field
Port
Aging
Size
VPN-instance
Description
Port information
Interface
CID
Interval(s)
FID
MaxHLen
Rate
Mode
Status

sflow agent

Use sflow agent to configure an IP address for the sFlow agent.
Use undo sflow agent to restore the default.
Syntax
sflow agent { ip ip-address | ipv6 ipv6-address }
undo sflow agent { ip | ipv6 }
Default
No IP address is configured for the sFlow agent. The device periodically identifies whether the sFlow
agent has an IP address. If it does not, the device automatically selects an IPv4 address for the sFlow
agent. It does not save the IPv4 address in the configuration file.
Views
System view
Predefined user roles
network-admin
Description
sFlow collector port.
Remaining lifetime of the sFlow collector. If this field displays N/A, the sFlow
collector never ages out.
Maximum length of the sFlow data portion in an sFlow packet.
Name of the VPN bound with the sFlow collector.
Description of the sFlow collector.
Information about interfaces configured with sFlow.
Interface configured with sFlow.
ID of the sFlow collector, for receiving counter sampled packets. If no sFlow
collector ID is specified, this field displays 0.
Counter sampling interval, in seconds.
ID of the sFlow collector for receiving flow sampled packets. If no sFlow collector
ID is specified, this field displays 0.
Maximum number of bytes that can be copied in a sampled packet (starting from
the packet header).
Number of packets out of which the interface samples a packet by using flow
sampling.
Flow sampling mode:
•
Determine—Samples a fixed number of packets.
•
Random—Samples a random number of packets.
sFlow status of the port:
•
Suspended—The sFlow feature is suspended because the port is down.
•
Active—The sFlow feature is active because the port is up.
409