Display Dsl Configuration - HP MSR series Command Reference Manual

Syntax
bootrom update file file-url [ slot slot-no-list ] [ all | part ]
Default
The entire Boot ROM is upgraded.
Views
User view
Default command level
2: System level
Parameters
file-url: File name (including the path) of the software to be upgraded, a string of 1 to 135 characters.
slot slot-no-list: List of slot numbers, representing multiple cards. The argument slot-no-list appears in the
form of { slot-no [ to slot-no ] }&<1-7>, where slot-no is the slot number of a card, in the range of 1 to the
maximum slot number, and &<1-7> means that you can specify up to 7 slot numbers or slot number
ranges for this argument.
part: Upgrades only the extension part of the Boot ROM.
all: Upgrades the entire Boot ROM.
Usage guidelines
This feature is only valid for ADSL2+ cards with CPUs.
The upgradable software includes Boot ROM and ADSL2+ card software. Before you upgrade, load the
new software file by FTP or other means to the Flash or CF card on your device and save it. Before
upgrading, shut down the interface with the shutdown command if the interface is up. After upgrading,
bring the interface up with the undo shutdown command.
Use the all keyword with caution. In case failure occurs, recovery is difficult and troublesome.
Example
# Upgrade software for an ADSL2+ card.
<Sysname> system-view
[Sysname]interface atm 2/0
[Sysname-Atm2/0]shutdown
[Sysname-Atm2/0] quit
[Sysname] quit
<Sysname> bootrom update file flash:/bcm6348.bin slot 1 part
This command will update BootRom file on board 2, Continue? [Y/N]y
Board 2 upgrading BOOTROM, please wait...
<Sysname> system-view
[Sysname]interface atm 2/0
[Sysname-Atm2/0]undo shutdown

display dsl configuration

Use display dsl configuration to display the actual configurations of a DSL interface.
259