Display Aft Configuration - HP MSR Series Command Reference Manual

Field
Slot 0
Slot 0 in chassis 1
IPv4
IPv6
Source IP/port
Destination IP/port
VPN instance/VLAN ID/VLL ID
Protocol

display aft configuration

Use display aft configuration to display AFT configuration.
Syntax
display aft configuration
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display AFT configuration.
<Sysname> display aft configuration
aft address-group 1
address 202.110.10.10 202.110.10.15
address 101.1.1.100 101.1.1.200
aft prefix-ivi 2013::
aft prefix-ivi 1111::
aft v6tov4 source 1::1 1.1.1.1
aft v6tov4 source 1::2 1.1.1.2
interface GigabitEthernet2/0/1
aft enable
Description
Member ID of the device in the IRF fabric. (Centralized devices in IRF
mode.)
Slot number of the card and the member ID of the device in the IRF fabric.
(Distributed devices in IRF mode.)
IPv4 address information.
IPv6 address information.
Source IP address and port number.
Destination IP address and port number.
VPN instance—MPLS L3VPN instance to which the session belongs.
VLAN ID—VLAN ID to which the session belongs for Layer 2 forwarding.
VLL ID—INLINE to which the session belongs for Layer 2 forwarding.
If no VPN, VLAN ID, or VLL ID is specified, a hyphen (-) is displayed for
the related field.
Transport layer protocol type, DCCP, ICMP, ICMPv6, Raw IP, SCTP, TCP,
UDP, or UDP-Lite.
589