Mitsubishi Electric MELSEC iQ-R Series Programming Manual page 482

Processing details
■One-shot output for command pulse period
This function block performs one-shot output for command pulse period according to the operation from the faceplate or the
input from the input variable (SET1 to SET5).
• When the setting is performed with the faceplate or the value of the input variable (SET1 to SET5) is changed from FALSE
to TRUE, this function block outputs a command pulse signal (TRUE) from the output variable (OUT1 to OUT5) by the time
period set with the command pulse period (DOT).
Input signal from the faceplate or
input pin (rising edge detection)
Command pulse signal
from output pin
Operation error
There is no operation error.
13 STATUS TAG
480
13.9 Push Button Operation (5 Input/5 Output) (M+M_PB_)
Command pulse
period (DOT)
t
t