Mitsubishi Electric MELSEC iQ-R Series Programming Manual page 197

Operation error
Error code Description
(SD0)
3400H An invalid operation (such as division by zero) is performed.
3402H Input data (PVP), operation constant (MTD, DVLS, PN, TRK, SVPTN_B0, SVPTN_B1), or tag data is a subnormal number or NaN (not a
number).
3403H An overflow has occurred.
3405H The control cycle (CT) setting is less than 0.
The execution cycle (T) setting is less than 0.
The value divided the control cycle (CT) by the execution cycle (T) exceeds 32767.
The sampling interval time for AT1 (AT1ST) setting is less than 0.
The time-out interval for AT1 (AT1TOUT1) setting is less than 0.
The time-out interval after maximum slope for AT1 (AT1TOUT2) setting is less than 0.
The execution cycle (T) setting is less than 0.
The value divided the sampling interval time for AT1 (AT1ST) by the execution cycle (T) exceeds 32767.
The value divided the time-out interval for AT1 (AT1TOUT1) by the execution cycle (T) exceeds 32767.
The value divided the time-out interval after maximum slope for AT1 (AT1TOUT2) by the execution cycle (T) exceeds 32767.
10.3 Velocity Type PID Control (Enable Tracking for primary loop) (M+P_PID_T)
10 LOOP CONTROL OPERATION
10
195