Mitsubishi Electric MELSEC iQ-R Series Programming Manual page 184

Process control function blocks

Hide thumbs Also See for MELSEC iQ-R Series:

Table of Contents

■Processing operation

: Performed, : Not performed

Control mode

Processing operation

Deviation check

*1 The processing of this tag access FB is performed every control cycle (CT).

*2 An alarm whose corresponding bit is TRUE (Valid) in the disable alarm detection (INH) is not detected.

*3 In the MAN mode, SV variation rate limiter processing is not performed.

Operation error

An invalid operation (such as division by zero) is performed.

Operation result of input data, operation constants, tag data, or inside of function blocks is a subnormal number or NaN (not a number).

An overflow has occurred.

9 I/O CONTROL

9.9 Manual Setter (M+P_MSET_)

Engineering value

SV variation rate & high/