Mitsubishi Electric MELSEC iQ-R Series Programming Manual page 419

■Public variable (others)
• Control mode change processing (MCHG function)
Variable Description
name
MODEIN Mode Change Signal
E_ Enable Mode Change
*1 Read or write the variables using a program. They are not displayed on "FB Property" of the engineering tool.
■Tag data
For details on tag data that is read or written with this tag FB, refer to the following.
Page 544 SEL
Processing details
This tag FB consists of the following function blocks.
Item
SEL function
MCHG function
Operation error
An error may occur in a function block that is used in a tag FB. For details on the error, refer to corresponding function blocks.
*1
Recommended range
1 to 5
1: MAN
2: AUT
3: CAS
4: CMV
5: CSV
TRUE: Execute
FALSE: Stop
Function block
M+P_SEL
M+P_MCHG
12.31 Loop Selector (Disable Tracking for primary loop) (M+M_SEL)
Initial value Set by Data type
0 User INT
FALSE User BOOL
Reference
Page 323 M+P_SEL
Page 338 M+P_MCHG
12 LOOP TAG
12
417