Panasonic KX-T336 System Reference Manual page 385

PBX-2
Programming
Conditions
• System - Operation (1/3)
PBX Code: 951
• Group - Trunk Group (2/2) (9-E-1.02, 10-C-15.00)
Type: TIE
TIE - CO Restriction: No
TIE-Forced Account Code Mode: Yes
• Special Attended - TIE Line Routing Table
No. Code Delete
Digit
01 950 0
02
:
System Programming
"Group-Trunk Group (2/2)",
TIE-CO Restriction
TIE-Forced Account Code Mode
TIE Incoming Delete Digit
TIE Incoming Insert Dial
"Special Attended-TIE Line
Routing Table",
Code
Delete Digit
Insert Dial
Trunk Group Hunt Sequence 01-05
"TIE Account Code (TAC)"
"TIE Trunk Relay Restriction (TRR)"
1.TIE-CO Restriction
Used to restrict or not extension users from "Calling from TIE to CO."
To restrict, set to "Yes." To allow, set to "No."
2.TIE Account Code
Used to allow certain extension users "Calling from TIE to CO."
If "Forced Account Mode" of the trunk group is set to "Yes", an extension user
must enter a valid TIE account code before "Calling from TIE to CO." TIE
Account Codes can be registered by using TAC command in the Dumb
Programming mode. (Refer to Section 10-C-65.02 "TIE Account Code.")
3."Calling from TIE to CO" is available only when your system employs PBX
Code (Location number) method for making/receiving TIE calls.
3-F-77
(70695)
Insert Trunk Group Hunt Sequence
Dial
01 02
10
Reference
VT
9-E-1.02
9-K-4.00
—
—
Dumb
10-C-15.00
10-C-65.01
10-C-65.02
10-C-65.03