Upgrading Controller A (Cli) - Oracle ZFS Storage Appliance Service Manual

You need to create a pool if one does not already exist.
Note -
The pool should be online and have no errors.
Controller A is now upgraded.
Next Steps
Upgrading Controller B -
■

Upgrading Controller A (CLI)

Use the following procedure to upgrade the first controller, controller A, of a clustered
appliance.
1.
Go to maintenance system reboot and enter y to reboot the appliance.
controller-a:> maintenance system reboot
This will reboot the appliance. Are you sure? (Y/N) y
2.
After the reboot completes, log back into the CLI and enter configuration cluster
show to verify that controller A is in the passive state.
In the example below, the state of controller A is AKCS_STRIPPED, which is the passive state.
controller-a:> configuration cluster show
state = AKCS_STRIPPED
...
peer_state = AKCS_OWNER
peer_description = Active
For information about the clustered states, see
Storage Appliance Administration Guide, Release
3.
Go to maintenance system updates and enter show to view the available updates.
controller-a:> maintenance system updates
controller-a:maintenance system updates> show
Updates:
UPDATE
ak-nas@2013.06.05.1.1,1-1.2
ak-nas@2013.06.05.2.0,1-1.9
BUI
"Cluster Takeover and Failback" in Oracle ZFS
OS8.6.0.
DATE
2013-12-6 23:37:50
2014-5-28 15:20:06
Upgrading Controller A (CLI)
STATUS
previous
current
Upgrading the Software 331