D Upgrading Library Firmware; Downloading Code To The Library Controller; Activating Code On The Library Controller - Oracle StorageTek SL3000 User Manual

Contact Oracle support to upgrade firmware. Only Oracle service representatives
should install new library firmware.
Library firmware does not contain drive code upgrades (see drive-specific
documentation).

Downloading Code to the Library Controller

■

Activating Code on the Library Controller

■
Downloading Code to the Library Controller
Download the firmware upgrade package (.jar file) to your system.
1.
In SLC, select Tools > Diagnostics, and then select the Library in the device tree.
2.
Click the Load Code tab.
3.
Locate the firmware package.
4.
Verify the contents and file name. Click Load.
5.
The download process could take up to 10 minutes.
Verify the package unpacked successfully (failed label shows 0).
6.
Activating Code on the Library Controller
Only Oracle service representatives should download and install new library
firmware. Contact Oracle support for assistance.
Download the code to the library (see
1.
Controller"
Select Tools > Diagnostics, and then select the Library in the device tree.
2.
Click the Activate Code tab.
3.
Upgrading Library Firmware
D
You cannot perform a code download or activation at the local
Note:
operator panel.
To activate code, the library must restart. Schedule the
Note:
activation for a time that is convenient for users.
on page D-1).
"Downloading Code to the Library
Upgrading Library Firmware D-1
D