System Chassis - Oracle ZFS Storage Appliance Service Manual

Viewing CPU Details (BUI)
either power off, reboot (power cycle), or reboot the appliance with diagnostics. Only select
the diagnostic reboot option when instructed by Oracle Service personnel because it could
take a long time to complete and could have adverse results if not performed properly. Do not
perform a diagnostic reboot when system-affecting operations are occurring, such as upgrading
firmware, executing commands, and configuring or unconfiguring storage. The diagnostic
reboot option is not available when using the system chassis power icon.

System Chassis

The primary system chassis is shown on the top half of the view. At the top left, click the right-
arrow icon
components within the chassis, and the name of the chassis. The chassis name is initially set to
the appliance name during installation. To change the chassis name, use the entry field on the
Configuration > Services > System Identity screen. For more information, see
Configuration" in Oracle ZFS Storage Appliance Administration Guide, Release
At the top right of the system chassis is the locator icon
power icon
appliance.
A thumbnail of the controller is presented at left. Clicking on the thumbnail or the "Show
Details" link takes you to a detailed view of the chassis, and is identical to clicking on the right-
arrow icon
The following information is presented in a summary view:
TABLE 2
Property
Manufacturer
Model
Serial
Processors
Memory
System
Data
Cache
20 Oracle ZFS Storage Appliance Customer Service Manual • July 2016
to get more detail about the chassis. The indicator notes if there are any faulted
, which presents a dialog box to either power off or reboot (power cycle) the
at the top left of the view.
System Chassis Properties
Description
Manufacturer of the system
System model name
System chassis hardware serial number
Count and description of processors in the system
Total memory in the system
Size and number of system disks used for the system image
Size and number of data disks in the system chassis. This is only valid for
standalone systems. If there are no data disks present, "-" will be displayed.
Size and number of read-optimized cache devices in the system chassis. This
is only valid for expandable systems that support additional disk shelves.
"System Identity
OS8.6.0.
to light the locator LED, and the