Minimum Required Software; Sun Blade Zonemanager; Upgrading The Nem Firmware - Oracle Sun Blade 6000 Product Notes

Server Modules (Blades)
Sun Blade Server X6270 M2
Sun Blade Server T6320, T6340, T6340, T6360
Sun Blade Storage Module M2

Minimum Required Software

This table lists minimum software versions are required to use SAS-2 with the NEM.
Component
CMM
Sun Blade Storage Module M2
Sun Blade Server X6270 M2SP
SG-SAS6-REM-Z
G(X)-SAS6-R-REM-Z

Sun Blade ZoneManager

Sun Blade ZoneManager is available through the Sun Blade 6000 CMM. This utility enables
you to assign storage devices located on Sun Blade storage modules with SAS2-enabled server
blades installed in the Sun Blade 6000 chassis.
A SAS2-enabled NEM must be installed in the chassis to enable a server blade to be zoned with
storage devices on a storage blade. At this time, zoning of SAS2 external ports on the NEM
is not supported. For information on setting up storage zoning, refer to the Oracle ILOM 3.0
documentation.

Upgrading the NEM Firmware

The Sun_Blade_6000_Ethernet_Switched_NEM_24p_10GE_sefos-1_2_2_15.pkg package
upgrades the NEM software and required components to the newest version.
Sun Blade 6000 Ethernet Switched NEM 24p 10GbE Release 1.2.2 Product Notes

Upgrading the NEM Firmware

SAS-2 REM
SG-SAS6-R-REM-Z
SG(X)-SAS6-R-REM-Z
SG-SAS6-REM-Z
SG-SAS6-REM-Z
Software Version
v3.0.10.15.b r57573
5.3.7
v3.0.14.12 r58608
■ MPT firmware: 5.00.17.00-IR
■ NVDATA: 05.02.00.14
■ Util version: 7.05.05.00 (2010.05.19)
■ Firmware: 2.120.63-1242
■ Utility version: 7.05.05.00 (2010.05.19)
Firmware and drivers can be downloaded from:
www.lsi.com/sep/Pages/oracle/sg_x_sas6-r-rem-z.
aspx
http://
17