Table of Contents
Advertisement
Importing a Saved Configuration (BUI)
Importing a Saved Configuration (BUI)
Use the following procedure to import a saved configuration. You can also use the import
function to import a configuration stored in a share on the appliance itself, that has the HTTP or
FTP protocol enabled for reading. You can enter a username and password for authentication to
the remote server if one is required.
1.
Go to Maintenance > System.
2.
Click the add icon
your web browser's file selection dialog to locate the previously exported
configuration.
Note -
function.
Importing a Saved Configuration (CLI)
Use the following procedure to import a saved configuration. You can also use the import
function to import a configuration stored in a share on the appliance itself, that has the HTTP or
FTP protocol enabled for reading. You can enter a username and password for authentication to
the remote server if one is required.
To import a saved configuration, use the following CLI command and specify the
universal unique identifier for the backup:
hostname:maintenance system configs> import cb2f005f-cf2b-608f-90db-fc7a0503db2a
Viewing Appliance Configurations (BUI)
Use the following procedure to view appliance configurations.
Go to Maintenance > System. The appliance configurations are listed at the
bottom of the page.
Viewing Appliance Configurations (CLI)
Use the following procedure to view appliance configurations.
314
Oracle ZFS Storage Appliance Customer Service Manual • July 2016
at the top of the saved configurations list and then use
You should upload the single, compressed archive file previously saved using the export
Hide quick links:
Advertisement
Table of Contents
