Viewing And Clearing Cpu Faults From Ilom; Understanding Hardware Status - Oracle ZFS Storage Appliance Service Manual

This procedure requires that you know the administrative account name and password (defaults
Before You Begin
are root and changeme), and that you know the IP address or host name of the controller
Service Processor (SP).
1. Using a Secure Shell (SSH) session, log in to Oracle ILOM by specifying your
administrative account user name and the IP address or host name of the
controller SP.
Examples:
ssh-l username host
ssh username@host
where host is either the IP address or host name of the controller SP when using DNS. For
example: ssh root@172.16.82.26
2. Type the password for the administrative account.
Oracle ILOM displays a default command prompt (->), indicating that you have successfully
logged in.

Viewing and Clearing CPU Faults from ILOM

Use the following procedure to view and clear CPU faults from ILOM.
Log in to the server as root using the ILOM CLI.
Before You Begin
To view server faults, use the following CLI command:
1.
-> show /SP/faultmgmt
To clear a CPU fault, use the following CLI command:
2.
-> set /SYS/MB/Pn clear_fault_action=true
Are you sure you want to clear /SYS/MB/Pn (y/n)? y

Understanding Hardware Status

To understand hardware status, use the following sections.
"Locating the Chassis Serial Number" on page 34
■
Viewing and Clearing CPU Faults from ILOM
Getting Started with Servicing the Hardware 33