Security Event Values - GE MiCOM P40 Agile Technical Manual

P44X/EN CS/Hb6
(CS) 15-18
Event Value
DNP SETTINGS DOWNLOADED
TRACE DATA DOWNLOADED
IEC61850 CONFIG DOWNLOADED
USER CURVES DOWNLOADED
PSL CONFIG DOWNLOADED
SETTINGS DOWNLOADED
PSL SETTINGS UPLOADED
DNP SETTINGS UPLOADED
TRACE DATA UPLOADED
IEC61850 CONFIG UPLOADED
USER CURVES UPLOADED
PSL CONFIG UPLOADED
SETTINGS UPLOADED
EVENTS HAVE BEEN EXTRACTED
ACTIVE GROUP CHANGED
CS SETTINGS CHANGED
DR SETTINGS CHANGED
SETTING GROUP CHANGED
POWER ON
SOFTWARE_DOWNLOADED
Table 5: Security event values
Where:
int is the interface definition (UI, FP, RP1, RP2, TNL, TCP)
prt is the port ID (FP, RP1, RP2, TNL, DNP3, IEC, ETHR)
grp is the group number (1, 2, 3, 4)
crv is the Curve group number (1, 2, 3, 4)
n is the new access level (0, 1, 2, 3)
MiCOM P40 Agile P441, P442, P444
Display
DNP STNG D/LOAD
BY <int>
TRACE DAT D/LOAD
BY <int>
IED CONFG D/LOAD
BY <int>
USER CRV D/LOAD
BY <int> GROUP <crv>
PSL CONFG D/LOAD
BY <int> GROUP <grp>
SETTINGS D/LOAD
BY <int> GROUP <grp>
PSL STNG UPLOAD
BY <int> GROUP <grp>
DNP STNG UPLOAD
BY <int>
TRACE DAT UPLOAD
BY <int>
IED CONFG UPLOAD
BY <int>
USER CRV UPLOAD
BY <int> GROUP <crv>
PSL CONFG UPLOAD
BY <int> GROUP <grp>
SETTINGS UPLOAD
BY <int> GROUP <grp>
EVENTS EXTRACTED
BY <int> <nov> EVNTS
ACTIVE GRP CHNGE
BY <int> GROUP <grp>
C & S CHANGED
BY <int>
DR CHANGED
BY <int>
SETTINGS CHANGED
BY <int> GROUP <grp>
POWER ON
-
S/W DOWNLOADED
-
Cyber Security