“Ied Configurator” Column (P442 / P444 Only) - GE MiCOM P40 Agile Technical Manual

P44x/EN ST/Hb6
(ST) 4-64
3.14 "IED configurator" column (P442 / P444 only)
The contents of the IED CONFIGURATOR column (for IEC 61850 configuration) are mostly
data cells, displayed for information but not editable. to edit the configuration, it is necessary
to use the IED (Intelligent Electronic Device) configurator tool within MiCOM S1 Agile.
Menu Text
IED CONFIGURATOR
Switch Conf.Bank
Setting which allows the user to switch between the current configuration, held in the
Active Memory Bank (and partly displayed below), to the configuration sent to and held in
the Inactive Memory Bank.
Restore MCL
Used to restore data from MCL binary file. MCL (MiCOM Configuration Language) files are
specific, containing a single devices IEC61850 configuration information, and used for
transferring data to/from the MiCOM IED.
Active Conf.Name
The name of the configuration in the Active Memory Bank, usually taken from the SCL file.
Active Conf.Rev
Configuration Revision number of the Active Memory Bank, used for version management.
Inact.Conf.Name
The name of the configuration in the Inactive Memory Bank, usually taken from the SCL
file.
Inact.Conf.Rev
Configuration Revision number of the Inactive Memory Bank, used for version
management.
IP PARAMETERS
IP Address
Displays the unique network IP address that identifies the relay.
Subnet Mask
Displays the sub-network that the relay is connected to.
Gateway
Displays the IP address of the gateway (proxy) that the relay is connected to.
SNTP PARAMETERS
SNTP Server 1
Displays the IP address of the primary SNTP server.
SNTP Server 2
Displays the IP address of the secondary SNTP server.
IEC61850 SCL
IED Name
8 character IED name, which is the unique name on the IEC 61850 network for the IED,
usually taken from the SCL (Substation Configuration Language for XML) file.
IEC61850 GOOSE
Default Setting
No Action No Action, Switch Banks
No action No action / Restore MCL
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
MiCOM P40 Agile P442, P444
Setting Range
Min. Max.
Setting
Step Size