GE MiCOM P40 Agile Technical Manual page 619

Hardware / Software-Version
MiCOM P40 Agile P442, P444
Software Hardware Model
version version number
D4.3
K
for P442 55
for P444
D4.4A
D4.5A
Branch D5.x : Idem D4.3-S with IEC61850-9-2 communication protocol
K
D5.A for P442 55
for P444
60A J 60
Relay type: P441, P442, P444
Date of
issue
The following features are modified:
- V3<, V4<, V3> or V4> fault display (front panel),
- V3<, V4<,n V3> and V4> added in DNP files,
- hysteresis of the first threshold of residual overvoltage = 98%,
2011
- Block A/R2 address in Modbus tab,
- assignation of some Logical Nodes data source
- BBRAM use
- New brand
Function Protection Update
IEC 61850 9.2 First HW (A)
06/2009
L5.6 PL
P444 Protection Functions qualified. Goose delay issue to be fixed
Goose performance improved
Improved too early directional decision and Inhibit AR logic
Last D5.x branch version : The following features are modified:
- Compatibility with IEC61850-9-2 Ethernet communication protocol,
- modification of "Ethernet NCIT" synchronization alarms
2011
- new NCIT alarm statuses
- Logical nodes arrangements modified
- New technical manual
- Function Protection based Model 55
- Cyber Security
2011
- PSL settings
- M3.0 PL
Full Description of changes
P44x/EN VH/Hb6
(VC) 16-15
S1 Compatibility
V3.1 (S1 Studio)
V3.4 (S1 Studio)