Extracting The Disturbance Data; Figure 6: Extracting The Comtrade Configuration File - GE MiCOM P40 Agile Technical Manual

P44x/EN SC/Hb6
(SC) 12-28
3.6.3

Extracting the disturbance data

The extraction of the disturbance record, as shown in the three figures above, is a two-stage
process that involves extracting the configuration file first and then the data file.
The following figure shows how the configuration file is extracted from the relay:
Figure 6: Extracting the comtrade configuration file
The following figure shows how the data file is extracted:
SCADA Communications
MiCOM P40 Agile P442, P444