Aedr2; Winaedr2; Wavewin; Device (Menu) Text Editor - GE MiCOM P40 Agile Technical Manual

P44x/EN GS/Hb6
(GS) 3-24
• extract disturbance records from a device
• control breakers and isolators
• set the date and time on a device
• set the active group on a device
• change the address of a device
• save settings, DNP 3.0 configuration, events and disturbance files to disk
1.10.6

AEDR2

AutoExtract Disturbance Records 2 (AEDR2) automatically reads COMTRADE disturbance
records from the rear communication ports of both K-Series and MiCOM Px40 devices with
the Courier protocol, and from Px40 devices with the IEC 60870-5-103 protocol.
AEDR2 is configured with an initialisation file. This file contains all settings, file names and
file directories needed for configuration. This file can be created and edited using a standard
text editor. Log files are also defined in the initialisation file which are used by AEDR2 to
record a history of events and errors.
Once configured, disturbance records are automatically extracted according to a schedule
from devices connected in a defined range of addresses. This is done using the Windows®
Scheduled Task facility which can be used to execute one or several schedules. All new
disturbance records are saved to a user-defined drive and filename.
AEDR2 also has a test function to ensure the initialisation file has been properly configured.
The command line is used to execute the test function and validate the initialisation file. The
command line can also be used to manually execute the AEDR2 application on demand.
WinAEDR2 is a management facility for AEDR2. It shows the history of all previous
extractions and has shortcut buttons to launch WaveWin, Windows Explorer and the
Scheduled Task facility. It can also be used to view log files, and edit and test the
initialisation file.
1.10.7

WinAEDR2

WinAEDR2 is a management facility for AEDR2. It shows the history of all previous
extractions and has shortcut buttons to launch WaveWin, Windows Explorer and the
Scheduled Task facility. It can also be used to view log files, and edit and test the
initialisation file.
1.10.8

Wavewin

Wavewin is used for viewing and analysing waveforms from disturbance records. It can be
used to determine the sequence of events that led to a fault.
Wavewin provides the following functions:
• File management
• Query management
• Log management
• Report generation
• Sequence of Events(SOE)
• Conversion of COMTRADE files
• Waveform summary
1.10.9

Device (Menu) Text Editor

The Menu Text Editor enables you to modify and replace the menu texts held in MiCOM
Px4x IEDs. For example, you may want to customise an IED so that menus appear in a
language other than one of the standard languages.
Getting Started
MiCOM P40 Agile P442, P444