GE MiCOM P40 Agile Technical Manual page 430

P44x/EN CM/Hb6
(CM) 9-6
2 SETTING FAMILIARISATION
When commissioning a MiCOM P44x relay for the first time, allow enough time to become
familiar with the method the settings are applied.
With the secondary front cover in place all keys except the [Enter] key are accessible. All
menu cells can be read. LEDs and alarms can be reset. However, no protection or
configuration settings can be changed, or fault and event records cleared.
Removing the secondary front cover allows access to all keys so that settings can be
changed, LEDs and alarms reset, and fault and event records cleared. However, menu cells
which have access levels higher than the default level will require the appropriate password
to be entered before changes can be made.
Alternatively, if a portable PC is available together with suitable setting software (such as
MiCOM S1 Agile), the menu can be viewed a page at a time to display a full column of data
and text. This PC software also allows settings to be entered more easily, saved to a file on
disk for future reference or printed to produce a settings record. Refer to the PC software
user manual for details. If the software is being used for the first time, allow sufficient time to
become familiar with its operation.
Commissioning
MiCOM P40 Agile P442, P444