GE MiCOM P40 Agile Technical Manual page 335

Programmable Logic
MiCOM 40 Agile P442, P444
Ordinal English Text
313 TOR Enable
314 TOC Start A
315 TOC Start B
316 TOC Start C
317 Any start
318 1ph Fault
319 2ph Fault
320 3ph Fault
321 Any Trip
322 Any Int. Trip A
323 Any Int. Trip B
324 Any Int. Trip C
325 Any Trip A
326 Any Trip B
327 Any Trip C
328 1P Trip
329 3P Trip
330 Brk.Conduct.Trip
331 Loss. Load Trip
332 SOTF/TOR Trip
333 tBF1 Trip
334 tBF2 Trip
335 Control Trip
Description
Trip On Reclose enable: indicates the TOR logic is
activated in the relay
Set to 1= 500 ms pulse initiated by:
'I A/R Reclaim' (internal) OR 'A/R reclaim' (External
Input)
OR Any pole open for more than 200 ms
Reset 500 ms after Any pole dead stops
Trip on Close start on phase A: indicates a trip order on
phase A has been issued by the SOTF level detectors
(Pickup time-delay = 20 ms)
Trip on Close start on phase B: indicates a trip order on
phase B has been issued by the SOTF level detectors
(Pickup time-delay = 20ms)
Trip on Close start on phase C: indicates a trip order on
phase C has been issued by the SOTF level detectors
(Pickup time-delay = 20 ms)
Any protection start logic with any phase
Default PSL: LED 4, Relay 06
(Fault record trigger in default PSL with 20 ms Dwell
Timer)
Single phase fault
Two phase fault
Three phase fault
Single or three pole trip or external protection trip
Default PSL: Relay 07
Any internal protection A phase trip
Default PSL: LED 1, Relay 02
Any internal protection B phase trip
Default PSL: LED 2, Relay 03
Any internal protection C phase trip
Default PSL: LED 3, Relay 04
Any trip A (internal or external protection)
Any trip B (internal or external protection)
Any trip C (internal or external protection)
Single pole trip (internal or external)
Three pole trip (internal or external)
Broken conductor trip
Loss of load trip (in application without communication
scheme and a 3P Trip logic)
Switch on to fault trip or trip on reclose: indicates that a
3-pole trip order has been issued by the TOR or SOTF
logic
Circuit Breaker failure on any trip, delayed by "CB Fail 1
Timer" (setting in "CB Fail" logic)
Circuit Breaker failure on any trip, delayed by "CB Fail 2
Timer" (setting in "CB Fail" logic)
Control trip command from user (by internal CB control)
P44x/EN PL/Hb6
(PL) 6-15
Source
PSL (OUT)
TOR
PSL (OUT)
SOTF
PSL (OUT)
SOTF
PSL (OUT)
SOTF
PSL (OUT)
All protection
PSL (OUT)
Distance
PSL (OUT)
Distance
PSL (OUT)
Distance
PSL (OUT)
All protection
PSL (OUT)
All protection
PSL (OUT)
All protection
PSL (OUT)
All protection
PSL (OUT)
All protection
PSL (OUT)
All protection
PSL (OUT)
All protection
PSL (OUT)
All protection
PSL (OUT)
All protection
PSL (OUT)
Broken Cond.
PSL (OUT)
Loss of load
PSL (OUT)
SOTF
PSL (OUT)
Breaker
failure
PSL (OUT)
Breaker
failure
PSL (OUT)
CB control