GE MiCOM P40 Agile Technical Manual page 82

P44x/EN ST/Hb6
(ST) 4-8
Menu text
CONFIGURATION
Copy From
Allows displayed settings to be copied from a selected setting group.
Copy To
Allows displayed settings to be copied to a selected setting group (ready to paste).
Setting Group 1
If the setting group is disabled from the configuration, then all associated settings and
signals are hidden, with the exception of this setting (paste).
Setting Group 2
Setting Group 3
Setting Group 4
Distance Protection
To enable (activate) or disable (turn off) the Distance Protection.
Power Swing
To enable (activate) or disable (turn off) the power swing blocking / out of step.
Back-up I>
To enable (activate) or disable (turn off) the directional or non-directional overcurrent
protection.
Neg Sequence O/C
To enable (activate) or disable (turn off) the Negative sequence overcurrent protection.
Broken Conductor
To enable (activate) or disable (turn off) the Broken Conductor detection.
Earth Fault O/C Prot
To enable (activate) or disable (turn off) the earth fault overcurrent protection. Two earth
fault overcurrent protections are available:
– Directional and non-directional earth fault overcurrent protection ('Earth Fault O/C'),
– Maximum of Residual – Zero Sequence power protection ('Zero Seq. power').
Earth fault prot (ZSP)
To enable (activate) or disable (turn off) the earth fault protection function (IN>stages)
Aided DEF
To enable (activate) or disable (turn off) the Aided directional earth fault protection.
Volt Protection
To enable (activate) or disable (turn off) the voltage protection (under / overvoltage)
function.
CB Fail & I<
To enable (activate) or disable (turn off) the circuit breaker fail protection function.
Supervision
To enable (activate) or disable (turn off) the Supervision (VTS, CTS and CVT) functions.
System Checks
To enable (activate) or disable (turn off) the check synchronisation (System check) menu.
Default setting
Group 1 Group1,2,3 or 4
No Operation No Operation / Group1, 2, 3 or 4
Enabled Enabled or Disabled
Disabled Enabled or Disabled
Disabled Enabled or Disabled
Disabled Enabled or Disabled
Enabled Enabled or Disabled
Enabled Enabled or Disabled
Disabled Enabled or Disabled
Disabled Enabled or Disabled
Disabled Enabled or Disabled
Disabled Enabled or 'Zero Seq. power' or 'Earth
Fault O/C'
Disabled Enabled or Disabled
Enabled Enabled or Disabled
Disabled Enabled or Disabled
Enabled Enabled or Disabled
Enabled Enabled or Disabled
Disabled Enabled or Disabled
MiCOM P40 Agile P442, P444
Available settings
Setting