Initial Problem Identification - GE MiCOM P40 Agile Technical Manual

P44x/EN TS/Hb6
(TS) 11-6
2

INITIAL PROBLEM IDENTIFICATION

Consult the table below to find the description that best matches the problem experienced,
then consult the section referenced to perform a more detailed analysis of the problem.
Symptom
Relay fails to power up
Relay powers up - but indicates error and halts
during power-up sequence
Relay Powers up but Out of Service LED is
illuminated
Error during normal operation
Mal-operation of the relay during testing
Table 1: Problem identification
MiCOM P40 Agile P442, P444
Refer To
Section 4
Section 5
Section 6
Section 7
Section 8
Troubleshooting