38/LUBRICATION SYSTEM
Removing the oil filter
27.5
Warning
Danger of scalding Engine oil and gear oil get very hot when the motocycle is driven.
–
Wear suitable protective clothing and protective gloves. If you get scalded, immediately flush the affected areas with luke-
warm water.
Warning
Environmental hazard Hazardous substances cause environmental damage.
–
Oil, grease, filters, fuel, cleaners, brake fluid, etc., should be disposed of as stipulated in applicable regulations.
–
Position the left exhaust cover
–
Mount and tighten screws
Guideline
Remaining frame bolts
100771-10
–
Place a suitable container under the engine.
–
Remove screws
100774-10
–
Pull oil filter
Circlip pliers reverse (51012011000) (
–
Completely drain the engine oil.
–
Clean the parts and the sealing area thoroughly.
100775-10
.
.
. Take off oil filter cover
out of the oil filter housing.
M5
5 Nm (3.7 lbf ft)
with the O-ring.
p. 440)
211