Removing The Oil Filter - KTM 690 Enduro R 2018 Owner's Manual

17 SERVICE WORK ON THE ENGINE
17.4
210

Removing the oil filter

Warning
Danger of scalding Engine and gear oil get very hot when the motorcycle is ridden.
–
Wear suitable protective clothing and safety gloves.
–
In the event of scalding, rinse the area affected immediately with lukewarm water.
Warning
Environmental hazard Hazardous substances cause environmental damage.
–
Dispose of oils, grease, filters, fuel, cleaning agents, brake fluid, etc., correctly and in compliance with
the applicable regulations.
S02211-10
Preparatory work
–
Place a suitable container under the engine.
Main work
–
Remove screws 1 . Remove the oil filter cover
O-ring.
–
3
Pull oil filter out of the oil filter housing.
Lock ring plier (51012011000)
2 with the