02/HANDLEBAR, CONTROLS AND INSTRUMENTS
Throttle grip with code 5209:
–
Check that angle piece
Guideline
Distance
»
If the specified value is not reached:
–
Adjust the throttle cable at the throttle valve. (
–
Position the throttle grip.
–
Attach the throttle cables.
301455-10
–
Open the throttle to the point where there is no play in the throttle cable.
Guideline
Marking
the housing.
»
The marking is not aligned:
–
Correct the play in the throttle cable using barrel adjuster
301462-10
–
Grease the front and rear parts of the cover.
Long-life grease (
–
Position cover
–
Mount screws
301456-10
–
Turn the handlebar all the way to the right.
–
Turn the handlebar stub to the left.
–
Slide on the throttle grip.
301449-10
of the throttle cable (closer) is seated correctly.
of the throttle grip must be aligned with the bottom edge
p. 438)
.
but do not tighten them yet.
9... 11 mm (0.35... 0.43 in)
p. 37)
.
36
of