Adjusting The Foot Brake Pedal Stub; Adjusting The Foot Brake Pedal - KTM 1190 RC8 R EU/UK 2009 Repair Manual

13/BRAKE SYSTEM

Adjusting the foot brake pedal stub

16.11

Adjusting the foot brake pedal

16.12
–
Stand the vehicle upright.
–
Remove screw cover
–
Add brake fluid to the MAX level.
Brake fluid DOT 4 / DOT 5.1 (
–
Refit screw with membrane.
Info
Clean up overflowed or spilt brake fluid immediately with water.
100717-10
–
Remove the screw
–
Position the foot brake pedal stub with the screw in one of the holes
to the desired lever length.
Guideline
Standard
–
Tighten screw.
Guideline
Bolt, foot brake pedal stub
100706-10
–
Use the tool to press in the anti-rotation lock
Info
The range of adjustment is limited.
–
Remove the tool.
The spring tension on the anti-rotation lock is released and the hex nut is
locked.
100707-10
–
Check the foot brake pedal setting.
Info
Position
setting.
100708-10
with membrane .
 
p. 436)
with the foot brake pedal stub.

Central hole
M6
of the foot brake lever may vary considerably, depending on the

according

10 Nm Loctite ® 243™
(7.4 lbf ft)
, then turn the piston rod
 
100
.