KTM 1190 RC8 R EU/UK 2009 Repair Manual page 121

30/ENGINE
–
Position the footrest bracket. Mount and tighten screws
Guideline
Screw, front footrest
bracket
–
Position the shift shaft deflection. Mount and tighten screw
Guideline
Screw, shift shaft deflector
on shift shaft
200523-11
–
Position the side stand bracket. Mount and tighten screws
Guideline
Screw, side stand bracket
–
Position the chain securing guide with the spacer. Mount and tighten screws
Guideline
Screw, shift shaft deflector
on chain securing guide
Remaining chassis screws
200522-11
–
Mount the slave cylinder with the spacer and sleeves. Mount and tighten screws
Guideline
Remaining chassis screws
–
Mount the engine sprocket cover. Mount and tighten screws
Guideline
Remaining chassis screws
200521-11
–
Plug in the connector of ignition coils
–
Install the exhaust system. (
200520-11
–
Plug in connector
–
Mount cable protector
200512-11
M8
M6
M8
M6
M6
M6
M6
.

p. 65)
of the gear position sensor and of the side stand switch.

.

.

25 Nm Loctite ® 243™
(18.4 lbf ft)
with the washers.

18 Nm Loctite ® 243™
(13.3 lbf ft)
.

25 Nm Loctite ® 243™
(18.4 lbf ft)
10 Nm Loctite ® 243™
(7.4 lbf ft)
–
10 Nm
(7.4 lbf ft)
10 Nm (7.4 lbf ft)
.

10 Nm (7.4 lbf ft)
119
.

.
