Installing The Middle Suction Pump; Installing The Crankshaft - KTM 1190 RC8 R EU/UK 2009 Repair Manual

30/ASSEMBLING THE ENGINE

Installing the middle suction pump

21.5

Installing the crankshaft

21.6
–
Swing shift forks
Info
Watch out for the shift rollers
–
Insert shift drum
–
Let the shift forks engage in the shift grooves.
200428-11
–
Mount shift rails
Info
Use a small amount of grease to fix the pressure springs in the shift rails.
–
Check the transmission for smooth operation.
200427-11
–
Mount external rotor
The marking is not visible after mounting.
–
Mount pin

–
Slide internal rotor
200426-11
–
Mount oil pump shaft
Marking
nal rotor is not.
–
Oil the parts.
200425-11
–
Slide the crankshaft into the bearing seat.
Info
Position the connecting rod as shown in the photo.
301423-10
to one side.

.

into the bearing seat.

with the pressure springs.

with the marking facing downward.

into the third hole of oil pump shaft
over the pin.

with internal rotor

of the internal rotor is visible after mounting while that of the exter-

after shaft keyway
 
.

165
.