30/DISASSEMBLING THE ENGINE
Removing the locking lever
19.38
Removing the left engine case
19.39
–
Remove screws
and
–
Swing the left section of the engine case upward. Remove screw
–
Loosen the left section of the engine case by striking it lightly with a plastic hammer and remove it.
Removing the crankshaft
19.40
–
Remove screw
–
Take off locking lever
301415-10
.
–
Remove dowels
–
Remove seal
301422-10
–
Remove the special tool.
Engine blocking screw (61229015000) (
–
Remove the crankshaft.
301423-10
.
with the sleeve and spring.
200421-10
.
.
.
p. 444)
135