Removing The Oil Filter - KTM 690 SMC R EU 2015 Owner's Manual

17 SERVICE WORK ON THE ENGINE
17.4

Removing the oil filter

Warning
Danger of scalding Engine oil and gear oil get very hot when the motorcycle is ridden.
–
Wear appropriate protective clothing and safety gloves. In case of burns, rinse immediately with lukewarm water.
–
Place a suitable container under the engine.
–
Remove the oil drain plug
–
Completely drain the engine oil.
100200-10
–
Thoroughly clean the oil drain plug with a magnet.
–
Mount the oil drain plug with the magnet and seal ring and tighten it.
Guideline
Oil drain plug with magnet
100201-01

with the magnet and seal ring.
M12x1.5
146
20 Nm
(14.8 lbf ft)