04/SHOCK ABSORBER, SWINGARM
–
Position the control lever as shown in the photo.
Control lever External tank
Oil reservoir
–
Activate On/Off switch
The suction process begins.
Pressure gauge
< 0 bar
200271-10
Vacuum gauge
4 mbar
–
Determine distance
cial tool.
Depth micrometer (T107S) (
The floating piston is positioned all the way at the bottom.
200591-01
–
When the vacuum gauge reaches the required value, turn control lever Oil reser-
voir
to Equalize pressure.
Guideline
4 mbar
The pressure gauge increases to the required value.
0 bar
200267-10
–
When the pressure gauge reaches the required value, turn control lever Damper
to Pressure.
Guideline
0 bar
Oil is pumped into the damper.
The pressure gauge increases to the required value.
3 bar
200268-10
–
When the pressure gauge reaches the required value, turn control lever Damper
to Vacuum.
Guideline
3 bar
The pressure gauge drops to the required value.
0 bar
200269-10
–
When the pressure gauge reaches the required value, turn control lever Oil reser-
voir
to Vacuum.
Guideline
0 bar
The vacuum gauge drops to the required value.
8 mbar
200270-10
is set to Closed, Damper
is set to Vacuum.
.
drops to the required value.
drops to the required value.
between the floating piston and reservoir hole with the spe-
p. 449)
56
is set to Vacuum and