02/HANDLEBAR, CONTROLS AND INSTRUMENTS
–
Unscrew lock nut
–
Screw in angle piece
Guideline
Distance
301459-10
–
Route the throttle cable so it is not under tension.
–
Attach throttle cable wire
301458-10
–
Attach the throttle cables.
–
Mount barrel adjuster
–
Mount lock nuts
–
Connect the KTM diagnostics tool.
–
Select the model.
–
Select "ECU Diagnosis".
–
Mark the "Engine management EFI LC8 RC8" control unit.
–
Press "Continue".
301457-10
–
Select "Adjustment".
–
"Please enter the password:"
–
Press "Continue".
–
Select "Throttle position sensor circuit A adjustment".
–
Press "Continue".
Info
The motor drive moves the throttle valve in circuit A to the zero setting.
–
Adjust the throttle cable play at the throttle grip using barrel adjusters
Guideline
Throttle cable play
–
Tighten lock nuts
–
Complete the adjustment by pressing the "Quit" button.
301461-10
.
until it is seated correctly.
9... 11 mm (0.35... 0.43 in)
(closer).
.
but do not tighten them yet.
3... 5 mm (0.12... 0.2 in)
.
38
.