38/LUBRICATION SYSTEM
Installing the oil filter
27.6
Filling up with engine oil
27.7
Info
Too little engine oil or poor-quality engine oil results in premature wear to the engine.
–
Insert oil filter
–
Lubricate the O-ring of the oil filter cover. Mount oil filter cover
–
Mount and tighten the screws.
Guideline
Remaining engine screws
100776-10
–
The oil must be topped up in two steps.
Engine oil
–
Remove the dipstick
100777-10
Engine oil (1st
quantity)
–
Replace the oil dipstick
Danger
Danger of poisoning Exhaust gases are poisonous and can result in uncon-
sciousness and/or death.
–
When running the engine, always make sure there is sufficient venti-
lation, and do not start or run the engine in a closed space without an
effective exhaust extraction system.
–
Start the engine and check that it is oil-tight.
–
Remove the dipstick
Engine oil (2nd
quantity)
–
Replace the oil dipstick
Danger
Danger of poisoning Exhaust gases are poisonous and can result in uncon-
sciousness and/or death.
–
When running the engine, always make sure there is sufficient venti-
lation, and do not start or run the engine in a closed space without an
effective exhaust extraction system.
–
Start the engine and check that it is oil-tight.
–
Check the engine oil level. (
.
M5
3.60 l (3.8 qt.)
External tem-
perature: ≥ 0 °C
(≥ 32 °F)
External tem-
perature: < 0 °C
(< 32 °F)
and top up the engine oil.
3.00 l (3.17 qt.)
External tem-
perature: ≥ 0 °C
(≥ 32 °F)
External tem-
perature: < 0 °C
(< 32 °F)
.
and pour in the remaining engine oil.
0.60 l (0.63 qt.)
External tem-
perature: ≥ 0 °C
(≥ 32 °F)
External tem-
perature: < 0 °C
(< 32 °F)
.
p. 209)
212
.
6 Nm (4.4 lbf ft)
Engine oil
(SAE 10W/50)
(
p. 436)
Engine oil
(SAE 5W/40)
(
p. 436)
Engine oil
(SAE 10W/50)
(
p. 436)
Engine oil
(SAE 5W/40)
(
p. 436)
Engine oil
(SAE 10W/50)
(
p. 436)
Engine oil
(SAE 5W/40)
(
p. 436)