02/HANDLEBAR, CONTROLS AND INSTRUMENTS
Adjusting the throttle cable at the throttle valve
6.7
–
Align the handlebar stub.
–
Position the distance sleeves.
–
Mount screw
–
Tighten screw
Guideline
Screw, handlebar stub
–
Tighten screw
301448-10
Guideline
Remaining frame bolts
–
Fully tighten screws
Guideline
Remaining frame bolts
301447-10
–
Mount handlebar weight
–
Tighten screw
Guideline
Remaining chassis screws
–
Adjust the play in the throttle cable. (
301446-10
–
Dismount the fuel tank. (
–
Remove the air filter. (
–
Unscrew lock nuts
–
Unscrew barrel adjuster
–
Detach the throttle cables.
301457-10
–
Detach throttle cable wire
301458-10
but do not tighten them yet.
.
.
.
.
.
p. 33)
p. 70)
p. 67)
.
.
(closer) and remove it.
M8
20 Nm
(14.8 lbf ft)
M5
5 Nm (3.7 lbf ft)
M5
5 Nm (3.7 lbf ft)
M6
10 Nm (7.4 lbf ft)
37