Removing The Rear Brake System; Installing The Rear Brake System - KTM 1190 RC8 R EU/UK 2009 Repair Manual
Hide thumbs
Also See for 1190 RC8 R EU/UK 2009:
- Owner's manual (283 pages) ,
- Owner's manual (273 pages) ,
- Owner's manual (272 pages)
Table of Contents
Advertisement
13/BRAKE SYSTEM
Removing the rear brake system
16.13
Installing the rear brake system
16.14
–
Remove the rear wheel. (
–
Unplug the brake light switch. Remove the cable clip.
–
Remove screw
–
Remove screws
200525-10
–
Remove screw
–
Take the brake line out of the guide. Completely remove the brake system.
200526-10
–
Position the brake system. Position the brake line in the guide.
–
Position the brake caliper. Mount and tighten screw
Guideline
Remaining chassis screws
200526-11
–
Position the footrest bracket. Mount and tighten screws
Guideline
Screw, rear footrest bracket
–
Position the brake fluid reservoir. Mount and tighten screw
Guideline
Screw, brake fluid reser-
voir of rear brake
200525-11
–
Plug in the brake light switch. Mount the cable clip.
–
Install the rear wheel. (
p. 81)
.
. Take off the footrest bracket.
. Take off the brake caliper with the brake caliper support.
M6
M8
M5
p. 81)
.
10 Nm (7.4 lbf ft)
.
25 Nm
(18.4 lbf ft)
.
5 Nm
Loctite
®
243™
(3.7 lbf ft)
101
Advertisement
Table of Contents
