35/WATER PUMP, COOLING SYSTEM
Removing the radiator
25.3
Installing the radiator
25.4
–
Remove the exhaust cover completely. (
–
Remove the inside cover. (
–
Remove the drain plug of water pump
coolant.
–
Mount and tighten the drain plug of water pump
Guideline
Remaining chassis screws
200505-10
–
Loosen the hose clamps. Detach radiator hoses
–
Push back the cover. Unplug the connector of thermoswitch
–
Unplug connector
–
Unplug the connector of ignition pulse generator
–
Unplug the connector of horn
200504-10
–
Loosen hose clamps
–
Remove screw
200506-10
–
Remove screw
200507-10
–
Position the radiator. Mount and tighten screw
Guideline
Remaining chassis screws
200507-11
p. 63)
p. 75)
and of radiator
M6
of the radiator fan.
.
. Remove the radiator hose.
.
. Take off the radiator.
M6
. Completely drain the
and radiator
.
10 Nm (7.4 lbf ft)
.
.
.
.
10 Nm (7.4 lbf ft)
195