Adjusting The Spring Preload Of The Fork; Bleeding Fork Legs - KTM 1190 RC8 R EU/UK 2009 Repair Manual

01/FORK, TRIPLE CLAMP

Adjusting the spring preload of the fork

5.3
Info
Spring preload determines the initial fork position.
The spring preload setting is optimal when it is set for the weight of the rider and that of any baggage and a passenger, and
thus ensures a compromise between maneuverability and stability.

Bleeding fork legs

5.4
–
Turn adjusting screws
Info
The adjustment screws are located at the top end of the fork legs.
Adjust both fork legs to the same setting.
–
Turn back counterclockwise by the number of turns according to the fork type.
Guideline
Spring preload - Preload Adjuster
Comfort
Standard
Sport
Full payload
Info
Turn clockwise to increase preload, turn counterclockwise to reduce spring
preload.
Changing the spring preload has no influence on the rebound damping
although the adjustment screws turn during the adjustment work. However,
100683-11 you should also adjust the rebound damping when you alter the spring
preload.
–
Lean the motorcycle on the side stand.
–
Remove bleeder screws
Any excess pressure escapes from the interior of the fork.
–
Mount and tighten bleeder screws.
Info
Perform this action on both fork legs.
100684-10
clockwise to the stop.

5 turns
5 turns
3 turns
3 turns
briefly.

16