Removing The Torque Limiter And Idler; Removing The Rotor; Removing The Idler And Timing Chain On The Left - KTM 1190 RC8 R EU/UK 2009 Repair Manual
Hide thumbs
Also See for 1190 RC8 R EU/UK 2009:
- Owner's manual (283 pages) ,
- Owner's manual (281 pages) ,
- Owner's manual (242 pages)
Table of Contents
Advertisement
30/DISASSEMBLING THE ENGINE
Removing the torque limiter and idler
19.21
Removing the rotor
19.22
Removing the idler and timing chain on the left
19.23
–
Take off torque limiter
–
Remove idler
Info
The idler has one disk at the front and one at the rear; the front washer usu-
ally sticks to the generator cover.
200347-10
–
Remove the screws and take off freewheel holder
–
Loosen and remove screw
Info
The crankshaft must be blocked.
301396-10
–
Screw the special tool into the crankshaft.
Pressure piece (61229008000) (
–
Mount special tool
screwing in the screw.
Extractor (58429009000) (
–
Remove the special tools.
200349-10
–
Take free-wheel-gear
200350-10
–
Take off idler
200353-10
.
with the washers and needle bearing.
of the rotor.
p. 444)
on the rotor, apply counterpressure, and pull off the rotor by
p. 440)
from rotor
.
with washer
.
.
128
Advertisement
Table of Contents
