KTM 1190 RC8 R EU/UK 2009 Repair Manual page 44

03/FRAME
–
Remove screw
–
Push the rear end up until the drill holes of the frame are level with the lower
rear drill holes of the rear.
–
Mount the screw and washer on the left and right sides of the vehicle, and
tighten.
Guideline
Screw, subframe
100765-10
–
Tighten screw
Guideline
Screw, subframe
100766-10
Setting a lower seat position:
–
Remove screw
–
Push the rear end down until the drill holes of the frame are level with the
upper rear drill holes of the rear.
–
Mount the screw and washer on the left and right sides of the vehicle, but do
not tighten.
100763-11
–
Remove screw
–
Push the rear end up until the drill holes of the frame are level with the upper
front drill holes of the rear.
100765-11
–
Mount the screw and washer on the left and right sides of the vehicle, and
tighten.
Guideline
Screw, subframe
100764-01
–
Tighten screw
Guideline
Screw, subframe
100765-12
with washer on the left and right sides of the vehicle.

M8
on the left and right sides of the vehicle.

M8
with washer on the left and right sides of the vehicle.

with washer on the left and right sides of the vehicle.

M8
on the left and right sides of the vehicle.

M8
20 Nm Loctite ® 243™
(14.8 lbf ft)
20 Nm Loctite ® 243™
(14.8 lbf ft)
20 Nm Loctite ® 243™
(14.8 lbf ft)
20 Nm Loctite ® 243™
(14.8 lbf ft)
42