Throttle Grip; Changing The Throttle Grip - KTM 1190 RC8 R EU/UK 2009 Repair Manual
Hide thumbs
Also See for 1190 RC8 R EU/UK 2009:
- Owner's manual (283 pages) ,
- Owner's manual (272 pages) ,
- Owner's manual (273 pages)
Table of Contents
Advertisement
02/HANDLEBAR, CONTROLS AND INSTRUMENTS
Throttle grip
6.5
Changing the throttle grip
6.6
The installed throttle grip
throttle valve.
The throttle grip
turning angle lower down the rev range. This makes the throttle response in the lower
rev range less aggressive and can fed in more progressively.
By installing the corresponding throttle grip the throttle response can be set to suit
your personal riding style / according to the operating requirements.
100783-10
The throttle grips can be distinguished by the markings stamped
The installed throttle grip has the marking 3081.
The supplied throttle grip has the marking 5209.
Info
Resetting the throttle cable play is necessary after replacement has been carried
out. It is imperative to use the KTM diagnostics tool for this.
100784-10
–
Loosen screw
–
Take off handlebar weight
301446-10
–
Unscrew screw
301447-10
–
Remove screw
–
Remove the spacer.
–
Loosen screw
301448-10
twists opens uniformly (linear) over the entire range of the
supplied does not open the throttle valves as widely at the same
.
.
.
.
.
34
into the inner face.
Advertisement
Table of Contents
