Removing The Oil Jet For The Clutch Lubrication - KTM 1190 RC8 R EU/UK 2009 Repair Manual

38/LUBRICATION SYSTEM

Removing the oil jet for the clutch lubrication

27.10
Coolant temperature: ≥ 70 °C
(≥ 158 °F)
Engine speed: 1,500 rpm
Coolant temperature: ≥ 70 °C
(≥ 158 °F)
Engine speed: 5,000 rpm
» The specifications have not been met:
–
Check the oil pumps for wear. Check that all oil holes are free of blockages.
–
Switch off the engine.
Warning
Danger of burns Some vehicle components get very hot when the machine
is driven.
–
Wear appropriate protective clothing and safety gloves. In case of burns,
rinse immediately with lukewarm water.
–
Remove the special tools.
–
Insert the new oil filter.
–
Lubricate the O-ring of the oil filter cover. Mount the oil filter cover.
–
Mount and tighten the screws.
Guideline
Remaining engine screws
–
Position the left exhaust cover
–
Mount and tighten screws
Guideline
Remaining frame bolts
–
Take the rear from the work stand. (
–
Check the engine oil level. (
100771-10
–
Remove screws
–
Take off the engine sprocket cover.
301426-10
1.3... 2.3 bar (19... 33 psi)
3.0... 4.0 bar (44... 58 psi)
M5
.

.

M5
p. 13)
p. 209)
.

215
6 Nm (4.4 lbf ft)
5 Nm (3.7 lbf ft)