41/THROTTLE VALVE BODY
Removing the throttle valve body to adjust
29.4
–
Remove the air filter. (
–
Unplug the connector of the manifold absolute pressure sensor
–
Take the manifold absolute pressure sensor out of the holder but do not detach the
vacuum hoses.
–
Disconnect plug-in connector
–
Take plug-in connector
200498-10
–
Remove screws
–
Remove screw
200499-10
–
Loosen hose clamps
200500-10
–
Loosen the spring-loaded band-type clamp
fuel hose.
Pliers for spring-loaded band-type clamp (60029057100) (
–
Pull up the throttle valve body and remove connector
–
Pull the throttle cables out of the filter box bottom with guide piece
–
Remove the throttle valve body.
200501-10
p. 67)
.
out of the holding bracket.
. Take off the retaining plates and holding brackets.
. Remove the cover.
.
.
using the special tool. Pull off the
p. 442)
with the seal.
.
221