13/BRAKE SYSTEM
Checking the rear brake linings
13.17
Warning
Danger of accidents Reduced braking efficiency caused by worn brake linings.
–
Change worn brake linings immediately.
Removing rear brake linings
13.18
Warning
Danger of accident Brake system failure.
–
Maintenance work and repairs must be carried out professionally.
–
Adjust brake fluid level up to mark
Guideline
Dimension
top edge of container)
Brake fluid DOT 4 / DOT 5.1 (
–
Position the cover with the membrane. Mount and tighten screws.
–
Activate the foot brake lever until you feel a firm pressure point.
201170-10
Info
Clean up overflowed or spilt brake fluid immediately with water.
–
Check the brake linings for minimum thickness
Minimum thickness
»
If the minimum thickness is less than specified:
–
Change the rear brake linings. (
–
Check the brake linings for damage and cracking.
»
If damage or wear is encountered:
–
Change the rear brake linings. (
700491-01
–
Remove the rear wheel. (
–
Remove the lock washer
–
Remove screw
700492-01
–
Remove the brake linings.
–
Clean brake caliper and brake caliper support.
700493-01
.
(brake fluid level below
p. 138)
p. 49)
.
.
10 mm (0.39 in)
.
≥ 1 mm (≥ 0.04 in)
p. 62)
p. 62)
61