12
WHEELS
12.5.3
Removing the brake disc of the rear brake
12.5.4
Installing the brake disc of the rear brake
–
Pull the rear wheel back and mount wheel spindle
Info
Mount the left and right chain adjusters
–
Mount nut
–
Push the rear wheel forward so that the chain adjusters are on the screws, and
tighten nut
Guideline
In order for the rear wheel to be correctly aligned, the markings on the left and
right chain adjusters must be in the same position relative to the reference
marks
B
Nut, rear wheel spindle
B00745-11
Finishing work
–
Take the motorcycle off of the rear wheel stand. (
Preparatory work
–
Raise the motorcycle with the rear wheel stand. (
–
Remove the rear wheel. (
Main work
–
Remove screws
–
Remove the brake disc.
304805-10
Main work
–
Clean the contact surface of the brake disc.
–
Position the brake disc with the label facing outward.
–
Mount and tighten screws
Guideline
Screw, rear brake disc
304805-10
Finishing work
–
Install the rear wheel. (
–
Take the motorcycle off of the rear wheel stand. (
and washer.
2
.
2
.
p. 56)
.
1
.
1
M8
p. 56)
.
3
in the same position.
4
M14x1.5
60 Nm
(44.3 lbf ft)
p. 10)
p. 10)
29 Nm
Loctite
(21.4 lbf ft)
p. 10)
57
®
243™